Pengaruh Bahan Karet Ban Bekas/Karet Alam (Hevea Brasiliensis) dan Polypropilena dalam Matriks Termoplastik
Keywords:
Karet Alam; Karet Ban Bekas; Polypropolena; TermoplastikAbstract
Research has been carried out on the influence of used tire rubber/natural rubber (Hevea Brasiliensis) and polypropylene in thermoplastic matrices. Natural rubber has clay properties, and is difficult to mix with other materials without a thermal process. This research was carried out using a heat process to speed up the mixing process. The aim of this research is to determine the effect of used tire rubber/natural rubber (Hevea Brasiliensis) and polypropylene in thermoplastic matrices. This research was carried out using varying concentrations of 25; 30; and 35 parts per hundred rubber (phr), while the initiator used is benzoyl peroxide as the initiator with variations of 0; 1.5; 1.9; 2.3 and 2.7. The research results concluded that the higher the phr, the lower the viscosity of the rubber compound, but the physical properties were not affected.
Downloads
References
Adiansyah, yunus, d., & marpongahtun, dan. (2017). Influence of palm oil palm consumption with adhesitating based on polypropylene and polypropylene grafting maleat anhidrat pengaruh perendaman serbuk batang kelapa sawit dengan perekat berbasis polipropilena dan polipropilena grafting maleat anhidrat (vol. 20, issue 3). Https://doi.org/https://doi.org/10.30596/agrium.v20i3.1049
Altenhofen, m., gurgel, m., vieira, a., costa, a., maçumoto, g., & beppu, m. M. (2011). Polyvinylchloride ( pvc ) and natural rubber fi lms plasticized with a natural polymeric plasticizer obtained through polyesteri fi cation of rice fatty acid. Polymer testing, 30(5), 478–484. Https://doi.org/10.1016/j.polymertesting.2011.03.008
Berzin, f., flat, j. J., & vergnes, b. (2013). Grafting of maleic anhydride on polypropylene by reactive extrusion: effect of maleic anhydride and peroxide concentrations on reaction yield and products characteristics. Journal of polymer engineering, 33(8), 673–682. Https://doi.org/10.1515/polyeng-2013-0130
Hassan, s. N. A. M., ishak, m. A. M., ismail, k., ali, s. N., & yusop, m. F. (2014). Comparison study of rubber seed shell and kernel ( hevea brasiliensis ) as raw material for bio-oil production. Energy procedia, 52, 610–617. Https://doi.org/10.1016/j.egypro.2014.07.116
Imamura, n., sakamoto, h., higuchi, y., & yamamoto, h. (2014). Effectiveness of compatibilizer on mechanical properties of recycled pet blends with pe , pp , and ps. June, 548–555.
Jetsrisuparb, k., pooritorn, k., & maungsean, a. (2017). Effects of surface hydrophobicity on functionalization of oleic acid on bombyx mori silkworm cocoons. 718, 120–125. Https://doi.org/10.4028/www.scientific.net/kem.718.120
Khalil, h. P. S. A., bhat, a. H., & yusra, a. F. I. (2012). Green composites from sustainable cellulose nanofibrils : a review. Carbohydrate polymers, 87(2), 963–979. Https://doi.org/10.1016/j.carbpol.2011.08.078
Krištofič, m. (2012). Compatibilisation of pp/pa blends.
Mahendra, i. P., wirjosentono, b., tamrin, ismail, h., mendez, j. A., & causin, v. (2019). The influence of maleic anhydride-grafted polymers as compatibilizer on the properties of polypropylene and cyclic natural rubber blends. Journal of polymer research, 26(9). Https://doi.org/10.1007/s10965-019-1878-2
Maurya, a. K., de souza, f. M., & gupta, r. K. (2023). Polyurethane and its composites: synthesis to application [chapter]. Acs symposium series, 1452(november 2023), 1–20. Https://doi.org/10.1021/bk-2023-1452.ch001
Novita, l., adiansyah, priyulida, f., sijabat, s., yusnaidar, purba, i. E., & nasution, d. Y. (2020). Grafting polypropylene with maleic anhydrous (mah) as particle board adhesive (particle board). Rasayan journal of chemistry, 13(02), 1215–1219. Https://doi.org/10.31788/rjc.2020.1325483
Romano, n., tavera-quiroz, m. J., bertola, n., mobili, p., pinotti, a., & gómez-zavaglia, a. (2014). Edible methylcellulose-based fi lms containing fructo-oligosaccharides as vehicles for lactic acid bacteria. Frin, 64, 560–566. Https://doi.org/10.1016/j.foodres.2014.07.018
Solt, p., konnerth, j., gindl-altmutter, w., kantner, w., mitter, r., & herwijnen, h. W. G. Van. (2019). Technological performance of formaldehyde-free adhesive alternatives for particleboard industry. International journal of adhesion and adhesives. Https://doi.org/10.1016/j.ijadhadh.2019.04.007
Srivastava, r. K., singh, a., srivastava, g. P., lehri, a., niranjan, a., tewari, s. K., kumar, k., & kumar, s. (2014). Chemical constituents and biological activities of promising aromatic plant nagarmotha (cyperus scariosus r.br.): a review. Proceedings of the indian national science academy, 80(3), 525–536. Https://doi.org/10.16943/ptinsa/2014/v80i3/55127
Tanrattanakul, v., sungthong, n., & raksa, p. (2008). Rubber toughening of nylon 6 with epoxidized natural rubber. 27, 794–800. Https://doi.org/10.1016/j.polymertesting.2008.05.013
Vlacha, m., giannakas, a., katapodis, p., stamatis, h., ladavos, a., & barkoula, n. (2016). Food hydrocolloids on the ef fi ciency of oleic acid as plasticizer of chitosan / clay nanocomposites and its role on thermo-mechanical , barrier and antimicrobial properties e comparison with glycerol. Food hydrocolloids, 57, 10–19. Https://doi.org/10.1016/j.foodhyd.2016.01.003
Xu, x., qiao, j., yin, j., gao, y., zhang, x., ding, y., liu, y., xin, z., cao, j., huang, f., & song, z. (2004). Preparation of fully cross-linked cnbr/pp-g-gma and cnbr/pp/pp-g-gma thermoplastic elastomers and their morphology, structure and properties. Journal of polymer science, part b: polymer physics, 42(6), 1042–1052. Https://doi.org/10.1002/polb.10694
Yan, c., yan, j., zhang, z., yu, d., wang, s., jiang, x., ai, c., & leng, z. (2024). Screw extrusion process used in the polymer modified asphalt field: a review. In journal of cleaner production (vol. 448). Https://doi.org/10.1016/j.jclepro.2024.141592
Yang, n., zhang, z. C., ma, n., liu, h. L., zhan, x. Q., li, b., gao, w., tsai, f. C., jiang, t., chang, c. J., chiang, t. C., & shi, d. (2017). Effect of surface modified kaolin on properties of polypropylene grafted maleic anhydride. Results in physics, 7(february), 969–974. Https://doi.org/10.1016/j.rinp.2017.02.030
