RISK ASSESSMENT IN 13-STORY BUILDING PROJECTS WITH THE FAILURE MODE AND EFFECT ANALYSIS (FMEA) METHOD AND THE DOMINO EFFECT

Authors

  • Salman Farid Lahmadi Faculty of Infrastructure Planning, Department of Environmental Engineering, Universitas Pertamina
  • Betanti Ridhosari Faculty of Infrastructure Planning, Department of Environmental Engineering, Universitas Pertamina
  • I Wayan Koko Suryawan Faculty of Infrastructure Planning, Department of Environmental Engineering, Universitas Pertamina
  • Ariyanti Sarwono Faculty of Infrastructure Planning, Department of Environmental Engineering, Universitas Pertamina

DOI:

https://doi.org/10.51544/jkmlh.v6i2.2206

Abstract

The building construction project is one of the activities that can pose a safety risk. Work safety risk assessment can be done using the Failure Mode and Effect Analysis (FMEA) method and looking at the Risk Priority Number (RPN) value. The purpose of this research is to take a case study of the building Office in determining the highest RPN and provide recommendations on its management. This project consists of 13 earthworks, passenger hoist, tower crane, scaffolding jobs, ironworks, formwork work, foundry work, mechanical, electrical plumbing (MEP) work, welding work, and floor wall doing works, and ceramic installation work. The highest RPN from the observations occurred in Iron Fabrication which can cause fingers hit by a bar cutter and bender. In this case, personal protective equipment (PPE) is significant in preventing these impacts from occurring in the project work area.

Downloads

Download data is not yet available.

References

Aftortu, M.R., Kustiani Ika., & Siregar, A. M. (2019). Analisis Risiko Proyek Konstruksi Studi Kasus Bendungan Way Sekampung Paket 2 Dengan Metode Failure Mode and Effect Analysis dan Domino. JRSDD, 7 (1), 549-558.

Apriyan, J., Setiawan, H., &Ervianto, W.I. (2017). Analisis Risiko Kecelakaan Kerja Pada Proyek Bangunan Gedung Dengan Metode FMEA. Jurnal Muara. 1, 115-123.

Daryanto. (2008). Kumpulan Gambar Teknik Bangunan. Jakarta: Rineka Cipta

ILO. (2015). Good Practices and Challenges in Promoting Decent Work in Construction and infrastructure Projects. Ganeva: ILO.

International Organization for Standardization (ISO), ISO 31000-Risk. Management:Principles and Guidelines, Geneva, 2009

Junaedi, Taufik., & Joko, Tri. (2013). Analisa dan pengukuran potensi risiko kecelakaan kerja dengan menggunakan metode APPM (Accident Potential Measurement method) pada proyek pembangunan dormitory 5 lantaiakademi Teknik keselamatan dan penerbangan Surabaya. Jurnal Teknik Pomit, 1-6.

Pardyani, I &Modjo, R. (2014). Penilaian Risiko Keselamatan Kerja Pada Pekerjaan Di Ketinggian Di Proyek Bogor Valley Residence & Hotel PT. X. Fakultas Kesehatan Masyarakat. Universitas Indonesia.

Pemerintah Indonesia. (2010). Peraturan Menteri Tenaga Kerja dan Transmigrasi Nomor PER.08/MEN/VII/2010 tentang Alat Pelindung Diri.

Downloads

Published

2021-12-22

How to Cite

Lahmadi, S. F., Ridhosari, B., Suryawan, I. W. K., & Sarwono, A. (2021). RISK ASSESSMENT IN 13-STORY BUILDING PROJECTS WITH THE FAILURE MODE AND EFFECT ANALYSIS (FMEA) METHOD AND THE DOMINO EFFECT. JURNAL KESEHATAN MASYARAKAT DAN LINGKUNGAN HIDUP, 6(2), 83–95. https://doi.org/10.51544/jkmlh.v6i2.2206