Penerapan Metode SAW Untuk Sistem Penunjang Keputusan Pemilihan Guru Terbaik Pada PKMI Binjai
DOI:
https://doi.org/10.51544/jurnalmi.v7i2.3598Keywords:
SAW, SISTEM PENDUKUNG KEPUTUSANAbstract
Giving awards to teachers is one of the strategies to increase work motivation and improve competence for teachers who have good performance. In Binjai Methodist High School in determining the best teacher, the attendance indicator is not fully sufficient to be used as a reference for awarding. Therefore, other criteria are needed that can be used as other additional criteria, therefore, it is necessary to develop a system that is capable of producing decision recommendations in determining the best teacher. In this study, the Simple Additive Weighting method (SAW) was used as a method which in its use included weighting/ratings on each criterion which would become a reference for teacher assessment. The criteria assessed in this study were educational level, teacher achievement/non-academic development, years of service, discipline, and examination/examination. From this study, the results were obtained that A1 = 0.98, A2 = 0.83, and A3 = 0.79 are 3 alternative decision recommendations from the best teacher who will be awarded.
Downloads
References
Ghufron, M. A. (2018). Revolusi Industri 4.0: Tantangan, Peluang Dan Solusi Bagi Dunia Pendidikan.
Panggabean, T., & Floriana Manalu, Y. (2021). Penerapan Metode Simple Additive Weighting (SAW) dalam Pemberian Reward Bagi Pegawai Honorer Menggunakan Pembobotan Rank Order Centroid. JURNAL MEDIA INFORMATIKA BUDIDARMA, 5(4), 1667–1673. https://doi.org/10.30865/mib.v5i4.3146
Apriastika, P., & Fajarita, L. (2019). Sistem Penunjang Keputusan Penentuan Guru Terbaik Pada SD Strada Santa Maria Dengan Metode Ahp (Analytical Hierarchy Process) Dan Saw (Simple Additive Weighting).
Putra, A. S., Aryanti, D. R., & Hartati, I. (2018). Metode SAW (Simple Additive Weighting) sebagai Sistem Pendukung Keputusan Guru Berprestasi ( Studi Kasus : SMK Global Surya).
Mesran, Afriany, J., & Hafni Sahir, S. (2019). Efektifitas Penilaian Kinerja Karyawan Dalam Peningkatan Motivasi Kerja Menerapkan Metode Rank Order Centroid (ROC) dan Additive Ratio Assessment (ARAS). Prosiding Seminar Nasional Riset Information Science (SENARIS), 813–821.
Damanik, S., & Utomo, P. (2020). Implementasi Metode ROC (Rank Order Centroid) Dan Waspas Dalam Sistem Pendukung Keputusan Pemilihan Kerjasama Vendor. KOMIK (Konferensi Nasional Teknologi Informasi Dan Komputer), 4(1), 242–248. https://doi.org/10.30865/komik.v4i1.2690
Angkoso, S. P., Rahmanto, A. N., & Slamet, Y. S. (2019). Faktor-Faktor yang Mempengaruhi Kualitas Informasi Pelayanan Bidang Akademik kepada Mahasiswa. Jurnal Manajemen Komunikasi, 1(2), 234–264. https://doi.org/10.24198/jmk.v1i2.9563
Lase, D. (2019). ‘Pendidikan di Era Revolusi Industri 4.0’, SUNDERMANN: Jurnal Ilmiah Teologi, Pendidikan, Sains, Humaniora Dan Kebudayaan, 12(2), pp. 28–43
Nadeak, A. S. (2019). Penerapan Metode ARAS (Additive Ratio Assessment) Dalam Penilaian Guru Terbaik. STMIK Budi Darma. https://seminar-id.com/semnas-sainteks2019.html
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Juliana, Tongam E Panggabean, Irwan Jani Tarigan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This work is licensed under a 